Product News

Robert Juliat’s Aledin 330 LED Wash, which debuted at Prolight & Sound 2011, will also be featured at PLASA 2011 along with the Aledin 630 LED profile. The Aledin 330 LED Wash is a variable beam angle (20° – 98°) 85W LED washlight that uses the same technology and light source as the Aledin 630 LED Profile spot. The Aledin 330 Wash offers a choice of two color temperatures (3500K or 5800K).

Scenex Lighting's LED Base 4 is designed to internally light truss pieces. Each low-profile fixture is designed to fit squarely inside standard 12-inch truss and produce a bright, even beam, with 12 3W tri-color RGB LEDs producing a range of colors from pastels to saturated hues.

Visual Productions CueCore is a stand-alone lighting installation control solution with a solid-state design for reliability, low-maintenance and energy efficiency. Operating and programming is done via an Internet interface. Connected to a browser, the CueCore functions as a 1024-channel lighting controller, complete with an industry-standard command-line interface.

Chauvet's Wireless Event LED Luminaire (WELL) is designed for event uplighting. The unit powered by a 12-volt battery and runs wire-free for up to 12 hours. Also available is a six-slot road case which doubles as a gang charger for all the units. Users can place six WELL fixtures into its case, plug directly into the wall and charge all the units at one time.

Lightware U.S.A., the US distributor for Budapest-based Lightware Visual Engineering, has announced the availability of new CPU2 card ugrades for Lightware's modular matrix family (16×16, 32×32, 64×64 and 80×80).

Prism Projection's RevEAL Profile joins the company's energy-efficient RevEAL Color Wash (RevEAL CW) and RevEAL Studio fixtures. It is a high-CRI, LED Profile Spot with 16,000-lumen output, a variable CCT range (2800k-6500k), adjustable focus from hard to soft edge, changeable lenses for beam angles from 14º to 70º, and a flat field. It also offers four shutters on a tri-plane; an M-size GOBO; DMX, ArtNet and local control; and universal AC input (90-260 VAC).

GLP's Impression Spot One is designed to provide an even beam for color mixing and achieve a focusable area for gobo projections. It uses an RGB LED engine with 8- or 16-bit control over each color, allowing for delicate color changes or instantaneous color bumps.

WARSAW, IN – Silver Lite 2.5, the recently-launched screen surface in Da-Lite's line of front projection materials, is a multi-purpose front projection surface that is optimized for passive linear and circular 3D applications. It is also well-suited to 2D front projection.

The Martin MAC 401 Dual CT Zoom is a versatile white light source wash luminaire with fast zoom, available as a white light or color plus white light source module that fits onto either side of Martin's dual-sided MAC 401 Dual RGB Zoom fixture. The MAC 401 CT Zoom's color temperature is adjustable between warm and cold (3000 – 7000K). Its large lens face produces a broad beam look. The MAC 401's beam can go from hypermode tight to a wide wash in less than 0.5 seconds.

I. Weiss' Viawinch, which recently joined the company's Via line of motorized rigging products, is positioned as a solution in between a manual hand crank and a high-end hoist.

The Martin MAC 401 Dual CT Zoom™ is a white light source wash luminaire with zoom. It is also available as a module that fits… Read More »Martin MAC 401 Dual CT Zoom