Skip to content

ESP-KNX Face Mount

Share this Post:

The ESP-KNX line of TV mounts from Entertainment Structural Products Inc. is designed for use out of the box and onto the truss in less than three minutes. The mount allows for unobstructed use of the interior of the truss. The Face Mount is available to fit all commercial box truss in multiple lengths and offsets. Custom sized units are available by special order. All versions are rated for 100-pound overhead loads with a safety factor of 5, with higher-rated versions available for higher loads.

More details from ESP-KNX (www.esp-knx.com):

ESSINGTON, PA-based ESP-KNX’s new line of TV mounts for truss installation on 3 and 4 chord truss are an inexpensive and high performance way to add monitors to your truss fabrications. The TV mounts snap on in seconds and secure with a single tension stud anywhere along the truss with no web interference. These patented mounts have a full 20 degrees of tilt and are available with all VESA patterns with Standard, QD, and Folding Versions for packing in a road case. As with all ESP’s innovative products, they’ll easily mount the heaviest TV’s.

The Face Mount is geared for entertainment-style temporary installations. All versions of the mount are minimally rated for 100 lb. overhead load with a design safety factor of 5, but there are higher rated versions for heavier loads. The ESP TV mount uses the entire moment capacity of the truss and does not impose such a substantial local bending moment on the lower truss chord. Additionally, the over-tightening of u-bolts and crushing of the lower chord is a non issue with the design. The mount may be positioned anywhere along the usable length of truss barring obstructions such as vertical support connections, and allows for completely unobstructed use of the interior of the truss. The Face Mount is available to fit all commercial box truss in multiple lengths and offsets. Custom sized units are available by special order. The special design of the ESP Face Mount allows you to have it out of the box and on the truss in perfect alignment in under three minutes time.